mold spring

mold spring 1.Diameter: 6-60mm 2. JIS and ISO 10243-1991 3.Heavy load mold spring 4.High quality

mold spring specification:

Introduction of mold spring: 

1.Paint:environmental protection electrophoresis

2.we have our own factory to produce all types of mold spring.

3.Specialiazed in precision mold spring .your inquiries will get highly attention and prompt reponse.

 

4.Specification: 6X10mm ---70X500mm .and non-standard mold spring.

5.Free design all kind of non-standard mold spring as you requested.

6.We have Own the advanced production machine,having reliable quality and functionality; adequate inventory .

7.Adopting the advanced environmental protection electrophoresis technology. 

Tolerance limits of mold spring  

Outer	Inner	free length	free length	load	curl direction
+0mm	+0.7mm	under  50mm	above 50 mm	±10%	right
-0.7mm	+0.1mm	±0.5mm	±1mm	±10%	right

 Deformed degree and working life of mold spring  

 

Working time	1 Million time	0.5 Million time	0.3 Million time	Max. million time	Color
TR (special light load )	40.0%	45.0%	50.0%	60.0%	silver
TY(minimal light load )	40.0%	45.0%	50.0%	60.0%	purple
TF(lighter load)	40.0%	45.0%	50.0%	58.0%	yellow
TL(light load)	32.0%	36.0%	40.0%	48.0%	blue
TM (medium load)	25.6%	28.8%	32.0%	38.0%	red
TH (heavy load)	19.2%	21.6%	24.0%	28.0%	green
TB(super heavy load)	16.0%	18.0%	20.0%	24.0%	brown

Using for guide stem

 

When spring without using guide stem ,according to the condition of mold spring ,there will be no stability and bending ,Using inner guide stem is the best choice.

 

>.When using inner guide stem,

Guide stem diameter should less 0.1mm than inner diameter for mold spring

 

>.When using outer guide stem

Guide stem inner diameter should increase 1.5mm than mold spring outer spring

 

>.When using one guide stem

Guide stem diameter should more than 0.15mm than spring outer diameter

 

>.In practice,guide stem should more than pedestal

Guide stem height shoulg higher a half than free length of mold spring .It can increase service life.

 

>.Mold spring only use for compression ,except extension ,torsion , or will be bending .transforamtion and scrap ,etc.

 

 

If you provide us a chance,we will show you that K brand mold spring is the best choice for you for mold sinking.For more information please do not hesitate to contact us at any time. Thanks for your time . 

mold spring